core_esp8266_phy.cpp

/*
 phy.c - ESP8266 PHY initialization data

 Copyright (c) 2015 Ivan Grokhotkov. All rights reserved.
 This file is part of the esp8266 core for Arduino environment.

 This library is free software; you can redistribute it and/or
 modify it under the terms of the GNU Lesser General Public
 License as published by the Free Software Foundation; either
 version 2.1 of the License, or (at your option) any later version.

 This library is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 Lesser General Public License for more details.

 You should have received a copy of the GNU Lesser General Public
 License along with this library; if not, write to the Free Software
 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include <stdint.h>
#include <stddef.h>
#include <stdbool.h>
#include <string.h>
#include "c_types.h"
#include "ets_sys.h"
#include "spi_flash.h"
#include "user_interface.h"

extern "C" {

static const uint8_t ICACHE_FLASH_ATTR phy_init_data[128] =
{
    /*[0] =*/ 5,  // Reserved, do not change
    /*[1] =*/ 8,  // Reserved, do not change
    /*[2] =*/ 4,  // Reserved, do not change
    /*[3] =*/ 2,  // Reserved, do not change
    /*[4] =*/ 5,  // Reserved, do not change
    /*[5] =*/ 5,  // Reserved, do not change
    /*[6] =*/ 5,  // Reserved, do not change
    /*[7] =*/ 2,  // Reserved, do not change
    /*[8] =*/ 5,  // Reserved, do not change
    /*[9] =*/ 0,  // Reserved, do not change
    /*[10] =*/ 4,  // Reserved, do not change
    /*[11] =*/ 5,  // Reserved, do not change
    /*[12] =*/ 5,  // Reserved, do not change
    /*[13] =*/ 4,  // Reserved, do not change
    /*[14] =*/ 5,  // Reserved, do not change
    /*[15] =*/ 5,  // Reserved, do not change
    /*[16] =*/ 4,  // Reserved, do not change
    /*[17] =*/ (uint8_t)-2, // Reserved, do not change
    /*[18] =*/ (uint8_t)-3, // Reserved, do not change
    /*[19] =*/ (uint8_t)-1, // Reserved, do not change
    /*[20] =*/ (uint8_t)-16, // Reserved, do not change
    /*[21] =*/ (uint8_t)-16, // Reserved, do not change
    /*[22] =*/ (uint8_t)-16, // Reserved, do not change
    /*[23] =*/ (uint8_t)-32, // Reserved, do not change
    /*[24] =*/ (uint8_t)-32, // Reserved, do not change
    /*[25] =*/ (uint8_t)-32, // Reserved, do not change

    /*[26] =*/ 225, // spur_freq_cfg, spur_freq=spur_freq_cfg/spur_freq_cfg_div
    /*[27] =*/ 10,  // spur_freq_cfg_div
    // each bit for 1 channel, 1 to select the spur_freq if in band, else 40
    /*[28] =*/ 0xff,   // spur_freq_en_h
    /*[29] =*/ 0xff,   // spur_freq_en_l

    /*[30] =*/ 0xf8, // Reserved, do not change
    /*[31] =*/ 0,    // Reserved, do not change
    /*[32] =*/ 0xf8, // Reserved, do not change
    /*[33] =*/ 0xf8, // Reserved, do not change

    /*[34] =*/ 78, // target_power_qdb_0, target power is 78/4=19.5dbm
    /*[35] =*/ 74, // target_power_qdb_1, target power is 74/4=18.5dbm
    /*[36] =*/ 70, // target_power_qdb_2, target power is 70/4=17.5dbm
    /*[37] =*/ 64, // target_power_qdb_3, target power is 64/4=16dbm
    /*[38] =*/ 60, // target_power_qdb_4, target power is 60/4=15dbm
    /*[39] =*/ 56, // target_power_qdb_5, target power is 56/4=14dbm

    /*[40] =*/ 0, // target_power_index_mcs0
    /*[41] =*/ 0, // target_power_index_mcs1
    /*[42] =*/ 1, // target_power_index_mcs2
    /*[43] =*/ 1, // target_power_index_mcs3
    /*[44] =*/ 2, // target_power_index_mcs4
    /*[45] =*/ 3, // target_power_index_mcs5
    /*[46] =*/ 4, // target_power_index_mcs6
    /*[47] =*/ 5, // target_power_index_mcs7

    // crystal_26m_en
    // 0: 40MHz
    // 1: 26MHz
    // 2: 24MHz
    #if F_CRYSTAL == 40000000
      /*[48] =*/ 0,
    #else
      /*[48] =*/ 1,
    #endif

    /*[49] =*/ 0,

    // sdio_configure
    // 0: Auto by pin strapping
    // 1: SDIO dataoutput is at negative edges (SDIO V1.1)
    // 2: SDIO dataoutput is at positive edges (SDIO V2.0)
    /*[50] =*/ 0,

    // bt_configure
    // 0: None,no bluetooth
    // 1: GPIO0 -> WLAN_ACTIVE/ANT_SEL_WIFI
    //    MTMS -> BT_ACTIVE
    //    MTCK  -> BT_PRIORITY
    //    U0RXD -> ANT_SEL_BT
    // 2: None, have bluetooth
    // 3: GPIO0 -> WLAN_ACTIVE/ANT_SEL_WIFI
    //    MTMS -> BT_PRIORITY
    //    MTCK  -> BT_ACTIVE
    //    U0RXD -> ANT_SEL_BT
    /*[51] =*/ 0,

    // bt_protocol
    // 0: WiFi-BT are not enabled. Antenna is for WiFi
    // 1: WiFi-BT are not enabled. Antenna is for BT
    // 2: WiFi-BT 2-wire are enabled, (only use BT_ACTIVE), independent ant
    // 3: WiFi-BT 3-wire are enabled, (when BT_ACTIVE = 0, BT_PRIORITY must be 0), independent ant
    // 4: WiFi-BT 2-wire are enabled, (only use BT_ACTIVE), share ant
    // 5: WiFi-BT 3-wire are enabled, (when BT_ACTIVE = 0, BT_PRIORITY must be 0), share ant
    /*[52] =*/ 0,

    // dual_ant_configure
    // 0: None
    // 1: dual_ant (antenna diversity for WiFi-only): GPIO0 + U0RXD
    // 2: T/R switch for External PA/LNA:  GPIO0 is high and U0RXD is low during Tx
    // 3: T/R switch for External PA/LNA:  GPIO0 is low and U0RXD is high during Tx
    /*[53] =*/ 0,

    /*[54] =*/ 2, // Reserved, do not change

    // share_xtal
    // This option is to share crystal clock for BT
    // The state of Crystal during sleeping
    // 0: Off
    // 1: Forcely On
    // 2: Automatically On according to XPD_DCDC
    // 3: Automatically On according to GPIO2
    /*[55] =*/ 0,

    /*[56] =*/ 0,
    /*[57] =*/ 0,
    /*[58] =*/ 0,
    /*[59] =*/ 0,
    /*[60] =*/ 0,
    /*[61] =*/ 0,
    /*[62] =*/ 0,
    /*[63] =*/ 0,

    /*[64] =*/ 225, // spur_freq_cfg_2, spur_freq_2=spur_freq_cfg_2/spur_freq_cfg_div_2
    /*[65] =*/ 10,  // spur_freq_cfg_div_2
    /*[66] =*/ 0,   // spur_freq_en_h_2
    /*[67] =*/ 0,   // spur_freq_en_l_2
    /*[68] =*/ 0,   // spur_freq_cfg_msb
    /*[69] =*/ 0,   // spur_freq_cfg_2_msb
    /*[70] =*/ 0,   // spur_freq_cfg_3_low
    /*[71] =*/ 0,   // spur_freq_cfg_3_high
    /*[72] =*/ 0,   // spur_freq_cfg_4_low
    /*[73] =*/ 0,   // spur_freq_cfg_4_high

    /*[74] =*/ 1,   // Reserved, do not change
    /*[75] =*/ 0x93,   // Reserved, do not change
    /*[76] =*/ 0x43,   // Reserved, do not change
    /*[77] =*/ 0x00,   // Reserved, do not change

    /*[78] =*/ 0,
    /*[79] =*/ 0,
    /*[80] =*/ 0,
    /*[81] =*/ 0,
    /*[82] =*/ 0,
    /*[83] =*/ 0,
    /*[84] =*/ 0,
    /*[85] =*/ 0,
    /*[86] =*/ 0,
    /*[87] =*/ 0,
    /*[88] =*/ 0,
    /*[89] =*/ 0,
    /*[90] =*/ 0,
    /*[91] =*/ 0,
    /*[92] =*/ 0,

    // low_power_en
    // 0: disable low power mode
    // 1: enable low power mode
    /*[93] =*/ 0,

    // lp_rf_stg10
    // the attenuation of RF gain stage 0 and 1,
    // 0xf: 0db,
    // 0xe: -2.5db,
    // 0xd: -6db,
    // 0x9: -8.5db,
    // 0xc: -11.5db,
    // 0x8: -14db,
    // 0x4: -17.5,
    // 0x0: -23
    /*[94] =*/ 0x00,


    // lp_bb_att_ext
    // the attenuation of BB gain,
    // 0: 0db,
    // 1: -0.25db,
    // 2: -0.5db,
    // 3: -0.75db,
    // 4: -1db,
    // 5: -1.25db,
    // 6: -1.5db,
    // 7: -1.75db,
    // 8: -2db
    // max valve is 24(-6db)
    /*[95] =*/ 0,

    // pwr_ind_11b_en
    // 0: 11b power is same as mcs0 and 6m
    // 1: enable 11b power different with ofdm
    /*[96] =*/ 0,

    // pwr_ind_11b_0
    // 1m, 2m power index [0~5]
    /*[97] =*/ 0,

    // pwr_ind_11b_1
    // 5.5m, 11m power index [0~5]
    /*[98] =*/ 0,

    /*[99] =*/ 0,
    /*[100] =*/ 0,
    /*[101] =*/ 0,
    /*[102] =*/ 0,
    /*[103] =*/ 0,
    /*[104] =*/ 0,
    /*[105] =*/ 0,
    /*[106] =*/ 0,

    // vdd33_const
    // the voltage of PA_VDD
    // x=0xff: it can measure VDD33,
    // 18<=x<=36: use input voltage,
    // the value is voltage*10, 33 is 3.3V, 30 is 3.0V,
    // x<18 or x>36: default voltage is 3.3V
    //
    // the value of this byte depend from the TOUT pin usage (1 or 2):
    // 1)
    // analogRead function (system_adc_read()):
    // is only available when wire TOUT pin17 to external circuitry, Input Voltage Range restricted to 0 ~ 1.0V.
    // For this function the vdd33_const must be set as real power voltage of VDD3P3 pin 3 and 4
    // The range of operating voltage of ESP8266 is 1.8V~3.6V，the unit of vdd33_const is 0.1V，so effective value range of vdd33_const is [18,36]
    // 2)
    // getVcc function (system_get_vdd33):
    // is only available when TOUT pin17 is suspended (floating), this function measure the power voltage of VDD3P3 pin 3 and 4
    // For this function the vdd33_const must be set to 255 (0xFF).
    /*[107] =*/ 33,

    // disable RF calibration for certain number of times
    /*[108] =*/ 0,

    /*[109] =*/ 0,
    /*[110] =*/ 0,
    /*[111] =*/ 0,

    // freq_correct_en
    // bit[0]:0->do not correct frequency offset, 1->correct frequency offset.
    // bit[1]:0->bbpll is 168M, it can correct + and - frequency offset,  1->bbpll is 160M, it only can correct + frequency offset
    // bit[2]:0->auto measure frequency offset and correct it, 1->use 113 byte force_freq_offset to correct frequency offset.
    // 0: do not correct frequency offset.
    // 1: auto measure frequency offset and correct it,  bbpll is 168M, it can correct + and - frequency offset.
    // 3: auto measure frequency offset and correct it,  bbpll is 160M, it only can correct + frequency offset.
    // 5: use 113 byte force_freq_offset to correct frequency offset, bbpll is 168M, it can correct + and - frequency offset.
    // 7: use 113 byte force_freq_offset to correct frequency offset, bbpll is 160M , it only can correct + frequency offset.
    /*[112] =*/ 0,

    // force_freq_offset
    // signed, unit is 8kHz
    /*[113] =*/ 0,

    // rf_cal_use_flash
    // 0: RF init no RF CAL, using all RF CAL data in flash, it takes about 2ms for RF init
    // 1: RF init only do TX power control CAL, others using RF CAL data in flash, it takes about 20ms for RF init
    // 2: RF init no RF CAL, using all RF CAL data in flash, it takes about 2ms for RF init  (same as 0?!)
    // 3: RF init do all RF CAL, it takes about 200ms for RF init
    /*[114] =*/ 1
};


// These functions will be overridden from C++ code.
// Unfortunately, we can't use extern "C" because Arduino preprocessor
// doesn't generate forward declarations for extern "C" functions correctly,
// so we use mangled names here.
#define __get_adc_mode _Z14__get_adc_modev
#define __get_rf_mode _Z13__get_rf_modev
#define __run_user_rf_pre_init _Z22__run_user_rf_pre_initv

static bool spoof_init_data = false;

extern int __real_spi_flash_read(uint32_t addr, uint32_t* dst, size_t size);
extern int IRAM_ATTR __wrap_spi_flash_read(uint32_t addr, uint32_t* dst, size_t size);
extern int __get_adc_mode();

extern int IRAM_ATTR __wrap_spi_flash_read(uint32_t addr, uint32_t* dst, size_t size)
{
    if (!spoof_init_data || size != 128) {
        return __real_spi_flash_read(addr, dst, size);
    }

    memcpy(dst, phy_init_data, sizeof(phy_init_data));
    ((uint8_t*)dst)[107] = __get_adc_mode();
    return 0;
}

extern int __get_rf_mode(void)  __attribute__((weak));
extern int __get_rf_mode(void)
{
    return -1;  // mode not set
}

extern int __get_adc_mode(void) __attribute__((weak));
extern int __get_adc_mode(void)
{
    return 33; // default ADC mode
}

extern void __run_user_rf_pre_init(void) __attribute__((weak));
extern void __run_user_rf_pre_init(void)
{
    return; // default do noting
}

uint32_t user_rf_cal_sector_set(void)
{
    spoof_init_data = true;
    return flashchip->chip_size/SPI_FLASH_SEC_SIZE - 4;
}

void user_rf_pre_init()
{
    // *((volatile uint32_t*) 0x60000710) = 0;
    spoof_init_data = false;
    volatile uint32_t* rtc_reg = (volatile uint32_t*) 0x60001000;
    rtc_reg[30] = 0;

    system_set_os_print(0);
    int rf_mode = __get_rf_mode();
    if (rf_mode >= 0) {
        system_phy_set_rfoption(rf_mode);
    }
    __run_user_rf_pre_init();
}


void IRAM_ATTR user_spi_flash_dio_to_qio_pre_init() {}

};