r102

openFyde prebuilt image - orangepi5

TL;DR:

This is the prebuilt image for the orangepi5-openfyde board under the openFyde project.

Installation:

• OpenFyde requires high speed disk IOs, so this overlay only supports NVME/SATA m2 SSDs.
• For NVME SSDs:
  1. Boot Orange Pi 5 in official Linux using TF card.
  2. Install the bootloader into SPI flash.
  3. Call dd if=orangepi5-openfyde-r102.img of=/dev/nvme0n1 status=progress bs=4M conv=fdatasync
  4. Call poweroff, remove the TF card, and boot into openFyde.
• For SATA SSDs:
  1. Boot Orange Pi 5 in official Linux using TF card.
  2. Install the SATA bootloader into SPI flash and add overlays=ssd-sata to your orangepiEnv.txt.
  3. Reboot. Do step 2 again until device /dev/sda appears.
  4. Call dd if=orangepi5-openfyde-r102.img of=/dev/sda status=progress bs=4M conv=fdatasync
  5. Call sudo mount /dev/sda1 /mnt/ and echo overlays=ssd-sata | sudo tee /mnt/unencrypted/Env.txt
  6. Call poweroff, remove the TF card, and boot into openFyde.

Upstream versioning info:

Chromium: 102.0.5005.179
Platform: 14695.133.0
Chromium OS manifest: https://chromium.googlesource.com/chromiumos/manifest.git/+/refs/heads/release-R102-14695.B

Highlights:

• First released in r102.

Full Changelog:

https://github.com/openFyde/overlay-orangepi5-openfyde/commits/r102

Checksum:

sha256sum(orangepi5-openfyde-r102.img.xz): 96f874be3135436058de110218807bf3e0eba6ed65c1a01715aed3884401dd0d