PulseTime - One of the bitterest thing in life

[rlajos]

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.
If you accidentally left the "PulseTimeX XXX" command in the console - and you forget about it - you will have definitely some more gray hair...

My short story:
I was using the device for quiet a long time and I hade to modify the logic, how it works. Integrated into Home Assistant, automations, scripts, etc. environment.
Everything worked almost perfect, except one thing. The relay was switching OFF "accidentally" , at least what I thought. I started debugging, searching the Rules (there were no...), Timers, from MQTT side, power supply (24V DC) replacing-modifying, Home Assistant and so on and on...
There was no trace, log entry, just an entry:
11:03:03.965 MQT: stat/kutszivattyuForceOn/RESULT = {"POWER":"OFF"}
11:03:03.968 MQT: stat/kutszivattyuForceOn/POWER = OFF
But why, no sign at all!
After a day of working, I started to remember something and searching the feature, I finally found the magical "PulseTime" command, what in my case was set to "PulseTime1 280". And of course it has switched off the relay after 3 min. Ok - it should work this way!
But maybe not me the only one, who has gone through this or similar case. I would advise:

• to put some information (like the ruletimer#) that "PulseTime1 is 0, command..." into the Console.
• Or in the Status 0

Thank you...

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• [ x] Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Problem is not scripter related, in this case open a discussion and tag gemu2015
• Device used (e.g., Sonoff Basic): Shelly 1
• Tasmota binary firmware version number used: 15.0.1
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255: 10:51:39.334 CMD: Backlog Template; Module; GPIO 255
  10:51:39.417 MQT: stat/kutszivattyuForceOn/RESULT = {"NAME":"Shelly 1","GPIO":[0,0,0,0,224,192,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":46}

  Configuration output here:

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:
10:52:39.535 MQT: stat/kutszivattyuForceOn/STATUS = {"Status":{"Module":0,"DeviceName":"Kutszivattyu force ON","FriendlyName":["Kutszivattyu force ON SW"],"Topic":"kutszivattyuForceOn","ButtonTopic":"0","Power":"0","PowerLock":"0","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"","SwitchMode":[1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
10:52:39.540 MQT: stat/kutszivattyuForceOn/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota.bin.gz","RestartReason":"Software/System restart","Uptime":"0T17:10:59","StartupUTC":"2025-06-21T15:41:40","Sleep":50,"CfgHolder":4617,"BootCount":3585,"BCResetTime":"2020-06-07T14:10:02","SaveCount":12368,"SaveAddress":"F7000"}}
10:52:39.544 MQT: stat/kutszivattyuForceOn/STATUS2 = {"StatusFWR":{"Version":"15.0.1(release-tasmota)","BuildDateTime":"2025-06-14T10:30:42","Boot":31,"Core":"2_7_8","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"452/699"}}
10:52:39.547 MQT: stat/kutszivattyuForceOn/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["RL IoT",""],"TelePeriod":30,"Resolution":"558180C0","SetOption":["0000A009","2805C80001000600003C5A0A002800000000","00000080","00006000","00004000","00000000"]}}
10:52:39.560 MQT: stat/kutszivattyuForceOn/STATUS4 = {"StatusMEM":{"ProgramSize":655,"Free":348,"Heap":21,"ProgramFlashSize":1024,"FlashSize":2048,"FlashChipId":"1540EF","FlashFrequency":40,"FlashMode":"DOUT","Features":["0809","8F9AC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","54000020","00000080","00000000"],"Drivers":"1,2,!3,!4,!5,!6,7,!8,9,10,12,!16,!18,!19,!20,!21,!22,!24,26,!27,29,!30,!35,!37,!45,62,!68","Sensors":"1,2,3,4,5,6","I2CDriver":"7"}}
10:52:39.568 MQT: stat/kutszivattyuForceOn/STATUS5 = {"StatusNET":{"Hostname":"kutszivattyuForceOn-4267","IPAddress":"10.30.0.180","Gateway":"10.30.0.1","Subnetmask":"255.255.255.0","DNSServer1":"10.30.0.1","DNSServer2":"0.0.0.0","Mac":"A4:CF:12:BA:30:AB","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
10:52:39.572 MQT: stat/kutszivattyuForceOn/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.100.100","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_BA30AB","MqttUser":"mqttuser","MqttCount":1,"MqttTLS":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
10:52:39.577 MQT: stat/kutszivattyuForceOn/STATUS7 = {"StatusTIM":{"UTC":"2025-06-22T08:52:39Z","Local":"2025-06-22T10:52:39","StartDST":"2025-03-30T02:00:00","EndDST":"2025-10-26T03:00:00","Timezone":99,"Sunrise":"04:52","Sunset":"20:45"}}
10:52:39.582 MQT: stat/kutszivattyuForceOn/STATUS10 = {"StatusSNS":{"Time":"2025-06-22T10:52:39","Switch1":"ON"}}
10:52:39.587 MQT: stat/kutszivattyuForceOn/STATUS11 = {"StatusSTS":{"Time":"2025-06-22T10:52:39","Uptime":"0T17:10:59","UptimeSec":61859,"Heap":21,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"POWER":"OFF","Wifi":{"AP":1,"SSId":"RL IoT","BSSId":"14:CC:20:C6:9C:88","Channel":11,"Mode":"11n","RSSI":44,"Signal":-78,"LinkCount":1,"Downtime":"0T00:00:04"}}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[sfromis]

If you like your hair as is, I can recommend setting Weblog 3, after which you'll get this message when the PulseTime acts:
SRC: PulseTimer
You can also issue the command without argument to see what's saved or remaining.

[rlajos]

I am bold :-)
This is what you should display in Weblog2!