Add option to boards to remove the spiffs filesystem and increase the code space

[robertgregor]

Hello, would it be possible to add to the boards.txt also:

generic.menu.FlashSize.512K=512K (0K SPIFFS)

[robertgregor]

I did this and it is working:
generic.menu.FlashSize.512K64=512K (64K SPIFFS)
generic.menu.FlashSize.512K64.build.flash_size=512K
generic.menu.FlashSize.512K64.build.flash_ld=eagle.flash.512k.ld
generic.menu.FlashSize.512K64.build.spiffs_start=0x6B000
generic.menu.FlashSize.512K64.build.spiffs_end=0x7B000
generic.menu.FlashSize.512K64.build.spiffs_blocksize=4096
generic.menu.FlashSize.512K64.upload.maximum_size=434160

generic.menu.FlashSize.512K0=512K (0K SPIFFS)
generic.menu.FlashSize.512K0.build.flash_size=512K
generic.menu.FlashSize.512K0.build.flash_ld=eagle.flash.512k.ld
generic.menu.FlashSize.512K0.build.spiffs_start=0x6B000
generic.menu.FlashSize.512K0.build.spiffs_end=0x7B000
generic.menu.FlashSize.512K0.build.spiffs_blocksize=4096
generic.menu.FlashSize.512K0.upload.maximum_size=499696

[igrr]

It may look like it works, but both options use the same linker script (eagle.flash.512k.ld). This means that the linker will use the same memory map for your 512K/0K variant, so when your code exceeds 434160, you will get linker error. You would also need to create another linker script (eagle.flash.512k0.ld) and adjust the values there.

[igrr]

Added in 81566a9

[asetyde]

Also I want this ! Thx

Sent from my iPhone

On 26 ott 2015, at 08:00, Ivan Grokhotkov notifications@github.com wrote:

Added in 81566a9

—
Reply to this email directly or view it on GitHub.

[sven337]

You could go further: the SPIFFS library is pretty big in terms of code space.
In order to support OTAs on a 512kB ESP03, I had to remove this lib to ensure that the code would be small enough.
I don't know what the best way of doing this conditionally is, but I think it would be a valuable feature.

[igrr]

@sven337 that would be a nice feature. Perhaps can be done by adding -DDISABLE_SPIFFS to compiler flags for the "no spiffs" variant.

[igrr]

Actually this doesn't seem to be necessary, because linker does a good job at removing unused code.

When I build an empty sketch for Generic (64k SPIFFS), binary size is 198636 bytes.
Running xtensa-lx106-elf-nm -C out.elf | grep spiffs returns no symbols.

When I add some FS functions, like this:

#include <FS.h>
void setup() {SPIFFS.begin();}
void loop() {}

Sketch size goes up to 229496 bytes. Running nm again, i see that spiffs library functions are present in the output file.

[sven337]

This doesn't match my findings, on the contrary I had spiffs functions show up in the binary even without using any spiffs functions in the program. I'll check and get back to you.