Open
Description
Problem description
No battery charge display for Tuya Zemismart blind cover motor TS0601 _TZE200_68nvbio9
Solution description
Add battery charge display
Custom quirk
Custom quirk
"""Tuya based cover and blinds."""
from typing import Optional, Union
from zigpy.profiles import zha
import zigpy.types as t
from zigpy.zcl import foundation
from zigpy.zcl.clusters.general import Basic, Groups, Ota, Scenes, Time
from zhaquirks import Bus
from zhaquirks.const import (
DEVICE_TYPE,
ENDPOINTS,
INPUT_CLUSTERS,
MODELS_INFO,
OUTPUT_CLUSTERS,
PROFILE_ID,
)
from zhaquirks.tuya import (
TuyaManufacturerWindowCover,
TuyaManufCluster,
TuyaPowerConfigurationCluster,
TuyaWindowCover,
TuyaWindowCoverControl,
TUYA_GET_DATA,
TUYA_SET_DATA_RESPONSE,
TUYA_DP_TYPE_VALUE,
)
TUYA_DP_ID_BATTERY = 0x0D
class TuyaZemismartManufacturerWindowCover(TuyaManufacturerWindowCover):
"""Manufacturer Specific Cluster for Zemismart cover device."""
def handle_cluster_request(
self,
hdr: foundation.ZCLHeader,
args: tuple[TuyaManufCluster.Command],
*,
dst_addressing: Optional[
Union[t.Addressing.Group, t.Addressing.IEEE, t.Addressing.NWK]
] = None,
) -> None:
"""Handle cluster request."""
# Tuya Zemismart Specific Cluster Commands
if (
hdr.command_id in (TUYA_GET_DATA, TUYA_SET_DATA_RESPONSE)
and args[0].command_id == TUYA_DP_TYPE_VALUE + TUYA_DP_ID_BATTERY
):
self.endpoint.device.battery_bus.listener_event(
"battery_change",
args[0].data[4],
)
else:
super().handle_cluster_request(hdr, args, dst_addressing=dst_addressing)
class TuyaZemismartSmartCover0601_battery(TuyaWindowCover):
"""Tuya Zemismart blind cover motor."""
def __init__(self, *args, **kwargs):
"""Init device."""
self.battery_bus = Bus()
super().__init__(*args, **kwargs)
signature = {
# "node_descriptor": "NodeDescriptor(byte1=2, byte2=64, mac_capability_flags=128, manufacturer_code=4098,
# maximum_buffer_size=82, maximum_incoming_transfer_size=82, server_mask=11264,
# maximum_outgoing_transfer_size=82, descriptor_capability_field=0)",
# "endpoints": {
# "1": { "profile_id": 260, "device_type": "0x0051", "in_clusters": [ "0x0000", "0x0004","0x0005","0xef00"], "out_clusters": ["0x000a","0x0019"] }
# },
# "manufacturer": "_TZE200_zah67ekd",
# "model": "TS0601",
# "class": "zigpy.device.Device"
# }
MODELS_INFO: [
("_TZE200_68nvbio9", "TS0601"),
],
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.SMART_PLUG,
INPUT_CLUSTERS: [
Basic.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaManufCluster.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
}
},
}
replacement = {
ENDPOINTS: {
1: {
DEVICE_TYPE: zha.DeviceType.WINDOW_COVERING_DEVICE,
INPUT_CLUSTERS: [
Basic.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZemismartManufacturerWindowCover,
TuyaPowerConfigurationCluster,
TuyaWindowCoverControl,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
}
}
}Additional information
I have added support for displaying battery charge for _TZE200_68nvbio9. May be suitable for other motors with batteries. You just need to change _TZE200_68nvbio9 to your model. Haven't tested the charge updates yet, shows 100%